Login Form
Registration
Profile Informations
Login Datas
or login
Details
- EVC6-IR's TFT full color monitor size is enlarged to 2.4 inch from 2.2 inch for better visibility . (The case remains in the same size.)
- HKS boost setting tool "EasyWriter" can be easily connected.
- Basic performance as a boost controller is the same as EVC6-IR.
Correction map grid point : 10 x 10.
Pressure correction range : ｰ180 - 180.
More precise correction is possible for modern smaller sized turbo. - Monitor Navigation System easily leads the user to the correct setting and logging screens.
- The proven Stepping Motor is utilized as a valve unit.
Display
Boost Setting Tool “EasyWriter”
This is for boost setting by PC.
Use a marketed USB communication cable to connect EVC and PC.
Download the software from HKS’ website.
Connection Diagram
FUNCTIONS
Boost pressure setting returns to stock pressure value when the unit is off.
Speed signal input enables the boost control with the speed. (500km/h)
The boost pressure can be increased by a designated value above the set value.
Input of the throttle signal and engine RPM or vehicle speed signals enables the boost control by a 3D map using 2 these signals as axes.
Boost pressure can be set in 3 different modes to use them for different conditions.
3 digital data readings of surge tank pressure and throttle angle, engine RPM or vehicle speed can be displayed in real time.
The differences between the boost pressure set value and actual value can be offset in 3 different modes. This ensures more precise setting.
Select the type of a bar graph from the boost pressure, throttle angle, engine RPM and vehicle speed.
If the boost exceeds the warning value, an audible beep and visible warning display notify the user. Also, the boost is lowered to the stock value or a preset value to prevents damage to the engine.
The bar graph displays the maximum value after it is reached. It can achieve easy instant recognition.
Throttle position sensor signal input enables the boost control with the throttle angle.
The maximum positive boost value is displayed for 3 seconds when the boost changes from positive pressure to negative pressure.
Engine RPM signal input or ignition signal input enables the boost control with the engine RPM.
(1 to 8 cylinders/up to 12000rpm)
All settings are stored in the internal memory; so settings will not be lost even when the ignition is off or the battery is disconnected.
Select the display unit’s brightness from 2 levels.
Select appropriate exhaust bypass type from swing valve type or poppet valve type.
Data can be locked with a password; it prevents data loss or inadvertent data changes.
Select the unit from kPa or PSI.
The side of the buttons can be switched by flipping the monitor vertically.
EVC6-IR 2.4 LCD Monitor Size
The monitor size is enlarged to 2.4inch for better visibility.
【Monitor Size】
Upper: EVC6-IR 2.4 (NEW)
Lower: EVC6-IR
Additional Information
| SKU | 45003-AK012 |
|---|---|
| Stock Traffic light status | red |
| Brand | HKS |
| Color | No |
Special Offers
-
Regular Price: £91.96
£72.00
Genuine JDM HONDA Fr...
Genuine H Badge from Honda Japan for the front of your FD2 Civic Type R 4dr.
